The technological answer to the ever-demanding requirements of building performance: safety, energy saving, maximum comfort, low maintenance costs.

Doors and windows have a very complex role: on one hand, they define the design of a building; on the other, they separate the internal and external environment. In line with sustainable architecture requirements, they have to guarantee the highest standards of energy saving, maximum comfort, acoustic performance, maximum resistance to weather agents, active and passive safety and low maintenance costs. EBE 65 is the technological answer by Secco Sistemi to the ever-demanding requirements of building performance. The innovative technological solution known as “thermal break”, which is made of polyamide and polyurethane, allows for highly structural profiles with low visual impact. Moreover, the four materials used – galvanized steel, stainless steel, corten steel and brass – can be combined to taste for the internal and external part of the profile. The EBE 65 system meets the most demanding requirements while offering, at the same time, different design solutions. This is possible thanks to its performance features, its wide choice of opening systems and its complete set of system accessories.

EBE 65 window

System and performance

EBE 65 window is an integrated system with accessories, seals and thermal break profiles 65 or 73.5mm deep, allowing a wide range of windows, rectangular, shaped or curved. They can be equipped with insulating glass up to 48 mm thick. Each solution is equipped with a related set of accessories (also concealed) integrated in the system.
The sealing of the window frames is guaranteed by a three-level sealing weep system. The performance of the EBE 65 thermally insulated system has been tested by the best European certifying labs under the reference standard EN 14351-1.

Technical chart
wind resistance – test pressure 5
wind resistance – frame bending C
water tightness 9A
acoustic performance (with Rw per IGU 45 dB) 47 (-2;-5) dB
thermal transmittance (with Ug glass 1,0 W/m²K) 2K) 1,16 W/m2K
air permeability 4
break-in resistance (WK)3
Size and variations

EBE 65 window is rebated on the interior and flush on the exterior. The standard solution has an 85 mm lateral frame section. A solution with 74mm lateral frame section and 85mm central section profiles is available for two-sash.

Materials

EBE 65 is available in galvanized steel – in a wide range of colours and superficial finishes – in AISI 304 brushed stainless steel, in AISI 316L polished or Scotch-Brite stainless steel, corten steel and in brass (OT67 copper alloy).

Glazing bead

Rectangular, gothic, thin (L shaped): the wide range of glazing beads allows different inner frame looks according to the architectural needs.

Handles

The DK “vitruvio” handles are available in paintable raw brass, burnished brass, chrome polished brass and polished brass. The medium square model is also available in corten steel. The system allows for different handles to be fitted.

Hinges

Standard three-wing hinges are adjustable and supplied in galvanized steel with “e-look” finish and coloured plastic cover. Stainless steel hinges are available in polished, Scotch-Brite or burnished finishing.

EBE 65 door

System and performance

EBE 65 door is an integrated system with accessories, seals and thermal break profiles 65 mm deep allowing for a wide range of windows, rectangular, shaped or curved.
They can be equipped with triple glazing up to 40 mm thick.
The sealing of the door frames is guaranteed by a three-side rebate double seal system and an automatic retractable seal. Each solution is equipped with a related set of accessories (also concealed) integrated in the system.
The performance of the EBE 65 thermally insulated system has been tested by the best European certifying labs under the reference standard EN 14351-1.

Technical chart
wind resistance – test pressure 4
wind resistance – frame bending C
water tightness 2A
acoustic performance (with Rw per IGU 42 dB) 42 (-1;-3) dB
thermal transmittance (with Ug glass 1,0 W/m²K) 2K) 1,57 W/m2K
air permeability 3
break-in resistance (WK)3
Sizes and variations

EBE 65 is an interior and exterior flush door.
The solution with butt or weld-on hinge has a 109mm lateral frame section.
By using three-wing or concealed hinges, the lateral face section becomes 134 mm.

Materials

EBE 65 is available in galvanized steel – in a wide range of colours and superficial finishes – in AISI 304 brushed stainless steel, in AISI 316L polished or Scotch-Brite stainless steel, corten steel and in brass (OT67 copper alloy).

Glazing bead

Rectangular, gothic, thin (L shaped): the wide range of glazing beads allows for different internal frame looks according to the architectural needs.

Handles

The “vitruvio” handles are available in paintable raw brass, burnished brass, chrome polished brass and polished brass. The medium square model is also available in corten steel.
The system allows for different handles to be fitted.

Hinges

Weld-on hinges are in galvanized and stainless steel. Three-wing hinges are adjustable and are available in galvanized steel, stainless steel, burnished stainless steel.
A three-wing hinge is provided also in corten steel.

EBE 65 Lift-and-slide

System and performance

EBE 65 lift-and-slide is an integrated system with accessories, seal and thermal break profiles 65 mm deep. This makes it possible to realise lift and slide door and window frames with one to four wings of big dimensions and weight (up to 400 kg). They can be equipped with double glazing up to 40 mm thick.
The sealings of the lift and slide frame is guaranteed by a four-side double steal system.
Each solution is equipped with a related set of concealing accessories integrated in the system. The performance of EBE 65 lift-and-slide thermally insulated system has been tested by the best European certifying labs under the reference standard EN 14351-1.

Technical chart
wind resistance – test pressure 3
wind resistance – frame bending C
water tightness 1A
acoustic performance
thermal transmittance (with Ug glass 1,0 W/m²K) 2K) 1,67 W/m2K
air permeability 4
break-in resistance (WK)2
Size and variations

EBE 65 lift-and-slide is available with 69 or 94 frame sections.
There are two solutions available for the threshold: with floor guide track or with guide track integrated in the frame with a drainage system.

Materials

EBE 65 is available in galvanised steel – in a wide range of colours and superficial finishes – in AISI 316L polished or Scotch-Brite stainless steel, corten steel and in brass (0T67 copper alloy).

Glazing bead

Rectangular, gothic, thin (L shaped): the wide range of glazing beads allows different internal frame looks according to the architectural needs.

Accessories

The integrated automated system for sliding doors can be fitted with door-leaves up to 400 kg heavy.