Doors and windows made of aluminium alloy EN AW 6060, according to EN 573/3, in the outside and of solid wood in the inside.

Fixed frame depth of 76.5 mm and moving frame depth of 100.5 mm, in order to ensure maximum resistance to wind dynamic pressure. Overlap of casing against wall of 25.5 mm. The interruption of the thermal bridge is obtained by inserting divider strips made in polyamide reinforced with fiberglass, characterised by a low level of thermal conductivity and by EPDM gaskets.

The air tightness system is open joint with a central EPDM gasket, inserted on the specific slot of the fixed frame, the casing seal is placed directly on the moving frame polyamide.

The mobile leaves’ glazings are held by the internal wood fillet, while glazing beads on the fixed frames are fastened to profiles with concealed screws and contrasting wood covering.

Accessories and closing seals fit to guarantee the following performances:

  • Air permeability UNI EN 12207 = 4
  • Water tightness UNI EN 12208 = E 1350
  • Resistance to wind load UNI EN 12210 = C 5